Ghost Bond-XL/PLATINUM/SUPREME (1.3oz)

Ghost Bond-XL/PLATINUM/SUPREME (1.3oz)

GHOST BOND XL

This liquid adhesive was designed to be used for lace bases BUT with extra moisture control. Once the bond fully cures, it limits the chances of water, oils or sweat permeating the bond.  This bond works extremely well for humid climates, clients with overactive sebaceous glands, clients that excessively perspire and most importantly clients who work out or participate in strenuous activities.

It contains no latex, no harsh solvents or any of the irritants frequently found in cheaper formulations. It has been specially formulated for oily scalps, high humidity, and heavy perspiration.

• Added moisture control & higher melting temperature for better performance
• Specially formulated for oily scalps, high humidity & heavy perspiration
• Water Based Copolymer – No harmful ingredients – Skin friendly
• Works wonderfully on both poly and lace systems
• Dries quick and transparently without shine

Direction for Use: 

Poly

1. 1 thin coating to the hair system
2. 4 thin coatings to the head. Put each coat on as soon as the previous coat turns clear (around 20 seconds)
3. After the 4th coating, wait 7 minutes and press the hair system into place.

Lace

Follow the same steps for poly but DO NOT APPLY TO LACE BASE. Apply to scalp only.

PATCH TEST REQUIRED BEFORE FULL APPLICATION

Ingredients: No Latex, No Harsh Solvents, New Formulation

Good Use:

• Can be used for PU and lace wigs
• Specially formulated to work for oily skin
• Specially formulated to work for higher levels of perspiration
• Specially formulated to work for high levels of humidity
• Dries clear without shine

GHOST BOND PLATINUM

• Ghost Bond Platinum hair replacement adhesive by Pro Hair Labs provides a strong bond with your skin with the need for less product than other brands.
• Specially designed for high temperatures and humidity, heavy perspiration and oily scalps to give a reliable bond regardless of the conditions.
• Absorbs light and avoids reflection so that no one else will notice.
• No harsh chemical means it is 100% safe for your skin.

Direction for Use:

1. If bonding a skin/polyurethane unit, apply one thin coat to the base. This should always be completed before you start applying Ghost Bond Platinum to the scalp

2. Apply 4 thin coats of Ghost Bond Platinum to the client's scalp, keeping the same quantity of adhesive to each coat. Allow roughly 20 seconds in between each coat to dry.

3. Once the 4th coat is complete, wait 5 minutes for Ghost Bond Platinum to completely cure. The recommended cleaner to remove Ghost Bond Platinum from the scalp is Ultra-Safe, all-natural adhesive remover. To remove Ghost Bond Platinum from the hair unit please use Ghost Buster.

PATCH TEST REQUIRED BEFORE FULL APPLICATION

Ingredients: Co-Polymer Dispersion, Propyl Paraben

GHOST BOND SUPREME

Pro Hair Labs’ Ghost Bond Supreme is formulated for anyone who has naturally oily skin, lives in a humid place, or just sweats a lot. It’s the new heavyweight water-based go-to glue for hair wearers with active lifestyles. And this practical, little 1.3oz bottle makes it even more convenient.

Ghost Bond goes on white but dries clear. Like a ghost; get it? And Ghost Bond Supreme offers an even more undetectable front hairline than its predecessors, for more confidence right where you need it.

Lower quality glues lose their strength as the sweat and oils from your scalp penetrate your bond. If you work out a lot or live in a hot, humid area, keeping a solid attachment can be a major hassle. Your wig or hairpiece begins to lift around the edges and the next thing you know you’re constantly touching up your hairline and worrying about your attachment.

Ghost Bond Supreme takes the worry out of wearing hair. No more constant touch-ups, no more hoping for just one more day, no more distractions. It’s just that strong.

But Ghost Bond Supreme is no bully: PHL takes safety seriously. Ghost Bond Supreme’s skin safe formula won’t irritate your scalp. It’s latex-free and they’ve eliminated the other harmful ingredients that sometimes go into hairpiece glue.

Directions: Shake well before using. 

1.If bonding a skin/polyurethane unit, apply one thin coat to the base. This should always be completed before you start applying Ghost Bond Supreme to the scalp.

2. Apply 4 thin coats of Ghost Bond Supreme to the client’s scalp, keeping the same quantity of adhesive to each coat. Allow roughly 20 seconds in between each coat to dry.

3. Once the 4th coat is complete, wait 5 minutes for Ghost Bond Supreme to completely cure.

The recommended cleaner to remove Ghost Bond Supreme from the scalp is Ultra-Safe, all-natural adhesive remover. To remove Ghost Bond Supreme from the hair unit please use Ghost Buster.

PATCH TEST REQUIRED BEFORE FULL APPLICATION.

Good Use:

• It’s safe and non-toxic
• No gooey mess
• It’s easy to use
• Clean up is easy
• Dries Fast

This 1.3oz bottle gets the job done for the right price, but if you’re looking for something a bit different, try these related products:

• Ghost Bond Supreme 5oz, Big glue in a bigger bottle, perfect for salons.
• Ghost Bond XL 2.3oz, PHL’s second-generation ghost.
• Regular ol’ Ghost Bond 2.3oz, the glue that launched a thousand imitators!